Home > products > Pump > Suber-water Pumps
Summary
Digesting and absorbing the technologies of introduced equipment, model YWF series engineering plastic clear liquid submerged pump and model YWFA series engineering plastic slurry submerged pump are elaborately designed. All flow contact parts are made of polyethylene engineering plastics with super high molecular weight. They are featured with good corrosive resistance and excellent shock resistance. In conveying corrosive liquids such as hydrofluoric acid, hydro-chloride, diluted sulfuric acid, concentrated alkali liquid, mixed acid, wastewater, etc., the pump has shown good performance.
Model YWF-series submerged pump is suitable for conveying clear corrosive media without solid granules, while model YWFA series submerged pump is suitable for conveying corrosive slurry containing big amount of granules (the mass concentration of the slurry is less than 20%, and the diameter of solid granule is less than 0.5mm.). The applicable temperature of the submerged pump is QO°C. The applicable temperature can be up to 100t, if the blade wheel and pump body are made of high temperature resistant materials. It can replace expensive stainless steel and fluoro-plastics submerged pumps underthe same media and working conditions.
The submerged pump in this series is featured with beautiful appearance, light weight, small vibration, low noise, small floor area, etc.It can run smoothly,has reliable performance and convenient repair.
II YWF Series Table Of Property Parameters
Model | mm Inlet*Outlet | Speed r/min | Capacity m2/h | Head m | Motor | maximum specific weight of input medium |
mm dcpth below the liquld surface |
|
KW Power | Model | |||||||
25-12 | 25*20 | 2900 | *5 | 12 | 0.75 | Y801-2 | <1.2 | *500 750 *1000 1250 *1500 1750 *2000 2250 *2500 |
32-15 | 32*25 | 2900 | 5 | 22 | 3 | Y100L-2 | <1.2 | |
*10 | 15 | 3.O | Y100L-2 | |||||
50-30 | 50*40 | 2900 | 10 | 32 | 5.5 | Y132S1-2 | <1.2 | |
*20 | 30 | 5.5 | Y132S2-2 | |||||
30 | 25 | 7.5 | Y132S2-2 | |||||
1450 | 5 | 8 | 1.5 | Y90S-4 | <1.2 | |||
10 | 7.5 | 1.5 | Y90S-4 | |||||
15 | 6.5 | 2.2 | Y100L-4 | |||||
65-50 | 65*65 | 2900 | 20 | 55 | 15 | Y160M2-2 | <1.2 | |
*30 | 50 | 15 | Y160M2-2 | |||||
40 | 45 | 18.5 | Y160L-2 | |||||
50 | 42 | 18.5 | Y160L-2 | |||||
1450 | 10 | 13.7 | 2.2 | Y100L1-4 | <1.2 | |||
15 | 12.5 | 2.2 | Y100L1-4 | |||||
20 | 11.2 | 3 | Y100L2-4 | |||||
25 | 10.5 | 3 | Y100L2-4 | |||||
80-35 | 80*65 | 2900 | 30 | 76 | 11 | Y160M1-2 | <1.2 | |
*40 | 35 | 11 | Y160M1-2 | |||||
60 | 30 | 15 | Y160M2-2 | |||||
70 | 20 | 15 | Y160M2-2 | |||||
1450 | 15 | 9 | 1.5 | Y90L-4 | <1.2 | |||
20 | 9 | 1.5 | Y90L-4 | |||||
30 | 7.5 | 2.2 | Y100L1-4 | |||||
35 | 5 | 2.2 | Y100L1-4 | |||||
100-38 | 100*80 | 2900 | 40 | 40 | 18.5 | Y160L-2 | <1.2 | |
*60 | 38 | 18.5 | Y160L-2 | |||||
80 | 34 | 18.5 | Y160L-2 | |||||
100 | 30 | 22 | Y180M-2 | |||||
1450 | 20 | 10 | 3 | Y100L2-4 | <1.2 | |||
30 | 9.5 | 3 | Y100L2-4 | |||||
40 | 8.5 | 3 | Y100L2-4 | |||||
50 | 7.5 | 4 | Y112M-4 | |||||
100-40 | 100*80 | 5900 | 60 | 43.5 | 30 | Y200L1-2 | <1.2 | |
80 | 42 | 30 | Y200L1-2 | |||||
*100 | 40 | 30 | Y200L1-2 | |||||
120 | 38 | 30 | Y200L1-2 | |||||
140 | 36 | 37 | Y200L2-2 | |||||
1450 | 30 | 10.8 | 4 | Y112M-4 | <1.2 | |||
40 | 10.5 | 4 | Y112M-4 | |||||
50 | 10 | 4 | Y112M-4 | |||||
60 | 9.5 | 5.5 | Y132S-4 | |||||
70 | 9 | 5.5Y132S-4 |
Model | mm Inlet*Outlet | Speed r/min | Capacity m2/h | Head m | Motor | maximum specific weight of input medium |
mm dcpth below the loquld surface |
|
KW Power | Model | |||||||
25-10 | 25*20 | 2900 | *5 | 12 | 0.75 | Y801-2 | <1.2 | *500 750 *1000 1250 *1500 1750 *2000 2250 *2500 |
32-15 | 32*25 | 2900 | 5 | 22 | 3 | Y100L-2 | <1.2 | |
*10 | 15 | 3.O | Y100L-2 | |||||
50-28 | 50*40 | 2900 | 10 | 32 | 5.5 | Y132S1-2 | <1.2 | |
*20 | 30 | 5.5 | Y132S2-2 | |||||
30 | 25 | 7.5 | Y132S2-2 | |||||
1450 | 5 | 8 | 1.5 | Y90S-4 | <1.2 | |||
10 | 7.5 | 1.5 | Y90S-4 | |||||
15 | 6.5 | 2.2 | Y100L-4 | |||||
65-50 | 65*65 | 2900 | 20 | 55 | 15 | Y160M2-2 | <1.2 | |
*30 | 50 | 15 | Y160M2-2 | |||||
40 | 45 | 18.5 | Y160L-2 | |||||
50 | 42 | 18.5 | Y160L-2 | |||||
1450 | 10 | 13.7 | 2.2 | Y100L1-4 | <1.2 | |||
15 | 12.5 | 2.2 | Y100L1-4 | |||||
20 | 11.2 | 3 | Y100L2-4 | |||||
25 | 10.5 | 3 | Y100L2-4 | |||||
80-32 | 80*65 | 2900 | 30 | 36 | 11 | Y160M1-2 | <1.2 | |
*40 | 35 | 11 | Y160M1-2 | |||||
60 | 30 | 15 | Y160M2-2 | |||||
70 | 20 | 15 | Y160M2-2 | |||||
1450 | 15 | 9 | 1.5 | Y90L-4 | <1.2 | |||
20 | 9 | 1.5 | Y90L-4 | |||||
30 | 7.5 | 2.2 | Y100L1-4 | |||||
35 | 5 | 2.2 | Y100L1-4 | |||||
100-35 | 100*80 | 2900 | 40 | 40 | 18.5 | Y160L-2 | <1.2 | |
*60 | 38 | 18.5 | Y160L-2 | |||||
80 | 34 | 18.5 | Y160L-2 | |||||
100 | 30 | 22 | Y180M-2 | |||||
1450 | 20 | 10 | 3 | Y100L2-4 | <1.2 | |||
30 | 9.5 | 3 | Y100L2-4 | |||||
40 | 8.5 | 3 | Y100L2-4 | |||||
50 | 7.5 | 4 | Y112M-4 | |||||
100-38 | 100*80 | 5900 | 60 | 43.5 | 30 | Y200L1-2 | <1.2 | |
80 | 42 | 30 | Y200L1-2 | |||||
*100 | 40 | 30 | Y200L1-2 | |||||
120 | 38 | 30 | Y200L1-2 | |||||
140 | 36 | 37 | Y200L2-2 | |||||
1450 | 30 | 10.8 | 4 | Y112M-4 | <1.2 | |||
40 | 10.5 | 4 | Y112M-4 | |||||
50 | 10 | 4 | Y112M-4 | |||||
60 | 9.5 | 5.5 | Y132S-4 | |||||
70 | 9 | 5.5 | Y132S-4 |
YWF/YWFA Series Clear Submered Pump Related Products
Catalog: Suber-water Pumps
Above:Vertical Long Shaft Pump